FEPM material datasheet

FEPM is highly resistant to a wide range of chemicals, such as acid, base and steam. FEPM has superior resistance to strong bases in comparison with FKM. FEPM finds ever-increasing applications thanks to these unique properties. FEPM has much better chemical resistance than FKM and is more cost effective than FFKM. Using AFLAS® will probably mean a significant reduction in your production costs.

HSS material datasheet

The term hardened steel is often used for a medium or high carbon steel that has been given heat treatment and then quenching followed by tempering. The quenching results in the formation of metastable martensite, the fraction of which is reduced to the desired amount during tempering. This is the most common state for finished articles such as tools and machine parts. In contrast, the same steel composition in annealed state is softer, as required for forming and machining.

FRPP material datasheet

Fibre-reinforced plastic (FRP) (also fibre-reinforced polymer) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood or asbestos have been used. The polymer is usually an epoxy, vinylester or polyester thermosetting plastic; phenol formaldehyde resins are still in use.

Nylon material datasheet

Nylon is a generic designation for a family of synthetic polymers, more specifically aliphatic or semi-aromatic polyamides.

ABS material datasheet

Acrylonitrile butadiene styrene (ABS) is a common thermoplastic polymer. Its glass transition temperature is approximately 105 °C (221 °F).[2] ABS is amorphous and therefore has no true melting point.

PEEK material datasheet

Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone (PAEK) family, used in engineering applications.

UPE material datasheet

Ultra-high-molecular-weight polyethylene (UHMWPE, UHMW) is a subset of the thermoplastic polyethylene. Also known as high-modulus polyethylene, (HMPE), or high-performance polyethylene (HPPE), it has extremely long chains, with a molecular mass usually between 3.5 and 7.5 million amu. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.

NBR material datasheet

LORRIC provides 13 kinds of metal and plastic material (brass, stainless steel (AISI303/316), HastelloyC, titanium, PVC, PP, PVDF, PSU, EPDM, NBR, VITON, and VITO F level) chemical resistance chart. Please choose proper material according to the chemical you use in production line for achieving best on-site performance and durability.

VITON-F material datasheet

Viton is a brand of synthetic rubber and fluoropolymer elastomer commonly used in O-rings, chemical-resistant gloves, and other molded or extruded goods. The name is a registered trademark of DuPont Performance Elastomers L.L.C.. Viton-F (Terpolymers of VF2/HFP/TFE): Oxygenated Automotive fuels. Concentrated aqueous inorganic acids, water, steam. Nominal polymer fluorine content: 70%.
123
Page:1 / Total Pages:3
+886-927721621